Hytera Technical Bulletin SUBJECT: MD782i will be Bricked if Applying Old Codeplug

[radioq]

Hytera Technical Bulletin

SUBJECT:

MD782i will be Bricked if Applying Old Codeplug Template Using any CPS Version V9.00.09.400.iM or older.

 

MODELS / SYSTEMS AFFECTED:

MD782i with “i”in the long model number, not band specific. i.e.:

 

SYMPTOM:

When the user opens an old codeplug template and try to write it into the MD782i, it will brick the radio and radio only shows a blank screen, and continue with the power cycle with green LED on.

https://hytera.sharepoint.com/:v:/s/HESE...Q?e=Aotwgw

 

CAUSE:

CPS application defect, it writes the old codeplug template into the new hardware version of MD782i and destroy the bootloader section.

 

RESOLUTION:

1. For the radios have been bricked, please use FUD kit A9.00.07.105IM_IN to fix it. (Contact HNA Technical Support)
   
2. Use New CPS version V9.00.09.600.iM to write any existing MD782-000X000-0000a-XX-H-L (Available on Dealer Portal)
   
3. If you have new HW MD782-000X000-00000i you can read the radio and create from scratch a new codeplug that you can write back to the new HW or to any other new HW MD782i.
   

 

SEVERITY RECOMMENDTION:

Medium – All the MD782i with “I" hardware version will have this issue, if user tries to write the old codeplug using old CPS; If user just read the radio and write back to the radio, it will be fine.