04-21-2019, 02:22 AM
- Enable BT on both devices
- Pair the RVM with the PDC
- Upon connecting, you will be prompted the following on the PDC “Only media audio can be played via BT if stereo is enabled. Would you like to proceed?”
- Press Cancel
- The VM680 will still continue to pair with the PDC. After connecting, if you click on the settings (the gear icon), you will see Radio audio connected status. Note: If you press OK on the prompt you will instead see Media audio connected.
The RVM PTT should work now. I’ve tested it on two PDCs and a VM682.